Powerplus POW64115 CHAINSAW 37.2CC 406MM EN - Manual (Page 13)

POW64115 EN
Copyright © 2011 VARO P a g e | 13 www.varo.com
9.2 Starting a cold engine
Fig 9a
 Activate the chain brake (move the hand guard
forward and engage it) (Fig 9a)
Fig 9b
 To start the saw, push the switch (ON/OFF
switch) to the ON (I) position. (Fig. 9b)
Fig 9c
 Pull out the choke (A) to the point where it
latches in place. (Fig. 9c)
 Press primer bulb 3 to 5 times.
fig 9d
 Place the saw on a firm and level surface. Hold
the saw securely with your foot as illustrated.
Tug sharply on the starter several times until
first firing sound is heard. (Fig. 9d)
Fig 9e
 Push the choke handle back in. (Fig. 9e)