Eton Elite E100 - Manual (Page 14)

12
6 CLOCK AND ALARM FEATURES continued
twice or just wait until the clock digits stop flashing.
SETTING THE ALARM
Set the alarm with the instructions below. Note that the alarm must
be activated to function. After setting the alarm time, be sure to read
the next section titled ACTIVATING AND DEACTIVATING THE ALARM.
The alarm will wake you to the last radio station tuned, unless set for
Favorite Station Wake-Up (Use system set code 01. See page 21).
When the alarm activates, it turns the radio on and the alarm activa-
tion symbol (31) appears flashing in the display. The radio will play for
30 minutes, until you turn it off or until you press the SNOOZE/LIGHT
button (see USING THE SNOOZE FEATURE, below).
To set the alarm:
1. Turn the radio off. The alarm clock digits (30) appear in the upper
right corner of the display.
2. Press/release the button labeled ‘Time Set’ twice. The alarm clock’s
digits flash in the display.
3. Within 5 seconds, set the hour using the Up/Hour button and the
minutes using the – button. Make sure that AM or PM (29) appear
in the display if your clock is set up in the 12 hr. AM/PM format.
4. Within 5 seconds of finishing, press the ‘Time Set’ button once or
just wait until the alarm digits stop flashing.
USING THE SNOOZE FEATURE
When the alarm activates and turns the radio on, the alarm activation
E100 OWNER’S MANUAL