Powerplus POWX145 CORDLESS GLUE GUN 35W EN - Manual (Page 8)

POWX145
EN
Copyright © 2014 VARO P a g e | 8 www.varo.com
9.1 Cleaning
 Keep the ventilation slots of the machine clean to prevent overheating of the engine.
 Regularly clean the machine housing with a soft cloth, preferably after each use.
 Keep the ventilation slots free from dust and dirt.
 If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
The tool may not come into contact with fluids. A liquid that penetrates into
the tool can cause a short circuit that can set the tool on fire.
Remove the mains plug before starting with cleaning the tool. Before
starting to clean the tool, let it cool off completely.
 When removing the tool from the loading station, the front part must be carefully pulled
upwards. Otherwise it is possible that the loading station will be damaged and that the drip
tray is removed.
 After you have finished cleaning, reinsert the drip tray in the recess provided for this
purpose and reattach the entire component on the loading station, by snapping it into the
bracket.
9.2 Cleaning the nozzle
 Remove cold excess glue with a sharp-edged object, or deposit the nozzle in only warm
water, so that glue rests can soften and can be removed by hand.
10 TECHNICAL DATA
Voltage / frequency 230V / 50Hz
Output 35W (500W)
11 SERVICE DEPARTMENT
 Damaged switches must be replaced by our after-sales service department.
 If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
12 STORAGE
 Thoroughly clean the whole machine and its accessories.
 Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
 Protect it from exposure to direct sunlight. Keep it in the dark, if possible.

Don’t keep it in plastic bags to avoid humidity build-up.
 Before storing your glue gun, make sure that the tool has cooled off completely.
 Do not suspend the tool from the mains cable.
 Close the front part of the loading station for storage.