Powerplus POWX204 PLANER 1500W 204MM EN - Manual (Page 3)

POWX204
EN
Copyright © 2014 VARO P a g e | 3 www.varo.com
JOINTER PLANER 204MM
POWX204
1 APPLICATION
This jointer-planer can be used for all kinds of truing and finishing work in wood, e.g., facing,
straightening. thinning, planing and jointing of natural wood up to 204 mm in width.
It is not designed for commercial use.
Use this tool only for the type of work for which it has been designed.
Any use other then those indicated in this manual is a misuse.
In the event the user alone is responsible for damages or injuries stemming from such misuse.
The manufacturer shall not be held responsible for any modification made to the tool or for any
damage that might result from said modifications.
Finally, use of this planer in accordance with the instructions in the present manual does not in
itself guarantee the elimination of all residual risk factors.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG A)
1. Adaptor for dust extraction
2. Dust extraction hood
3. Height adjustment for infeed table
4. Infeed table/ Trueing
5. Cover profile for cutter shaft
6. Height adjustment for cutter shaft
cover profile
7. Gearbox cover
8. ON/OFF Power switch / safety
switch
9. Overload protection
10. Rubber foot
11. Thickness planer
12. Outfeed table/ Trueing
13. Trueing stop
14. Height adjustment for thickness
planer
3 PACKAGE CONTENT LIST
 Remove all packing materials
 Remove remaining packaging and transit supports (if existing)
 Check the completeness of the packing content
 Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
 Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
Jointer Planer
manual
Accessories (Fig B)
A = Adjusting tool
B = spacer
C = flat spanner
D = 2 planer knives (210 x 16,5 x 1,5 mm)
( mounted on machine)
E = 2 infeed boxes
F = hexagonal wrenches