Powerplus POWXQ5330 MITRE SAW 1500W 254MM EN - Manual (Page 11)

POWXQ5330 EN
Copyright © 2013 VARO P a g e | 11 www.varo.com
9.12 Replacing the saw blade
Disconnect the tool from the outlet before working on the saw blade. Wait a
while before touching the saw blade. It can be very hot. The dents of the
saw blade are very sharp.
 Position the saw in the uppermost position.
 Loosen the screw of the guard plate.
 Turn it around until the attachment bolt is visible.
 While holding down the blocking button, use the delivered key for loosening the bolt in a
clockwise direction.
Assembly is carried out in the reverse order.