Powerplus POWXQ5330 MITRE SAW 1500W 254MM EN - Manual (Page 13)

POWXQ5330 EN
Copyright © 2013 VARO P a g e | 13 www.varo.com
15 TROUBLE SHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Motor does not run. No electricity arrives at the
machine.
The motor is overloaded or
overheated. Check the power supply and
the power line.
Allow the machine to run idle
for about 2 minutes to cool
down.
Vibrations are too
strong. Screws or parts are loose.
The mitre saw is not correctly
mounted.
Work piece is not properly
supported. Tighten all screws.
Mount the mitre saw
correctly.
Secure the work piece.
16 WARRANTY
 This product is warranted for a 5-year period effective from the date of purchase by the first
user.
 This warranty covers all material or production flaws. It does not include defective parts
subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories
such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment,
accidents or alterations; nor the cost of transportation.
 This warranty covers all material or production flaws, excluding batteries, chargers,
defective parts subject to normal wear and tear such as, in particular, bearings, brushes,
cables, plugs… Accessories such as drills, drill bits, saw blades etc. also do not fall under
this warranty.
 Damage and/or defects resulting from inappropriate use also do not fall under the warranty
provisions.
 We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool.
 Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.
 You can always obtain more information at the number 00 32 3 292 92 90.
 Any transportation costs shall always be borne by the customer, unless agreed otherwise in
writing.
 At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.
 Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not
following the instructions given in the manual), inexpert assembly, lightning strike, erroneus
net voltage. This list is not exhaustive.
 Acceptance of claims under warranty can never lead to the prolongation of the warranty
period nor commencement of a new warranty period in case of a device replacement.
 Devices or parts which are replaced under the warranty therefore remain the property of
Varo NV.
 We reserve the right to reject a claim whenever the purchase cannot be verified or when it
is clear that the product has not been properly maintained. (Clean ventilation slots, carbon
brushes serviced regularly, etc.).
 Your purchase receipt must be kept as proof of date of purchase.