Powerplus POWXQ5335 TELESC. MITRE SAW 1800W 254MM EN - Manual (Page 11)

POWXQ5335 EN
Copyright © 2014 VARO P a g e | 11 www.varo.com
11 TECHNICAL DATA
Nominal Voltage 230V ~ 50 Hz
Power rating 1800W
No load speed 4500min-1
Protection class II
Blade size 254mm x 30 mm x 2.8mm
Weight 19 kg
12 CUTTING CAPACITY
Worktable tilting
angle Head tilting angle Height x width (mm)
90° 90° 90 x 305 mm
45° (left) 90° 90 x 215 mm
45° (right) 90° 90 x 215 mm
90° 45° 42 x 305 mm
45° (left) 45° 42 x 215 mm
45° (right) 45° 42 x 215 mm
13 NOISE
Noise values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
93 dB(A)
Acoustic power level LwA 106 dB(A)
ATTENTION! The sound power level may exceed 85 dB(A), in this case
individual hearing protection shall be worn.
aw (Vibration) 3.1 m/s² k = 1.5 m/s²
14 STORAGE
 Thoroughly clean the whole machine and its accessories.
 Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
 Protect it from exposure to direct sunlight. Keep it in the dark, if possible.

Don’t keep it in plastic bags to avoid humidity build-up.
15 TROUBLE SHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Motor does not run. No electricity arrives at the machine.
The motor is overloaded or
overheated. Check the power supply and
the power line.
Allow the machine to run idle
for about 2 minutes to cool
down.
Vibrations are too
strong. Screws or parts are loose.
The mitre saw is not correctly
mounted.
Work piece is not properly supported. Tighten all screws.
Mount the mitre saw
correctly.
Secure the work piece.