To start engine and engage blade – Powerplus POWXQG7556 LAWNMOWER 190CC 560MM EN User Manual

Page 11

Advertising
background image

POWXQG7556

EN

Copyright © 2014 VARO

P a g e

| 11

www.varo.com

Replace all fuel tanks and container caps securely.
Before tipping the lawn mower to carry out any work on the blade or drain oil, remove fuel from
tank.

WARNING: never fill fuel tank indoors, with engine running or until the
engine has been allowed to cool for at least 15 minutes after running.

7.2

To start engine and engage blade

Before start, adjust the speed adjusting lever at

“1”-position.

Fig 10A

Fig 10B

Fig 10C
1.

The unit is equipped with a rubber boot over the end of the spark plug. Make certain the
metal loop on the end of the spark plug wire (inside the rubber boot) is fastened securely
over the metal tip on the spark plug.

2.

When starting cool or warm engine, turn throttle choke lever at anywhere between

”position to “

”position.

3.

When operating

, turn throttle choke lever to “

”position. (Fig.10A, Fig.10B)

4.

Standing behind the unit grasp the brake control handle and hold it against the upper
handle as shown in fig. 10C.

5.

Grasp the starter handle as shown Fig. 10C and pull up rapidly. Return it slowly to the
rope guide bolt after engine starts.

6.

Release the brake control handle to stop the engine and blade.

Start the engine carefully according to instructions and with feet well away
from the blade.

Advertising