Adjustment for an appropriate angle (fig 2), Mounting and dismounting the grass catcher, Starter handle – Powerplus POWXQG7556 LAWNMOWER 190CC 560MM EN User Manual
Page 7
POWXQG7556
EN
Copyright © 2014 VARO
P a g e
| 7
www.varo.com
5.2
Adjustment for an appropriate angle (Fig 2)
1.
Pull the locking lever opening.
2.
By rotating the upper handle, which acts on the adjustment mechanism for angle
adjustment, a suitable angle can be adjusted in the range of -20º to 20º (5 position: -20º/-
10º/0º/10º/20º) as the Fig.2 shown.
3.
Push the locking lever closed to connect the lower handle and the upper handle.
Fig 2
5.3
Mounting and dismounting the grass catcher
Fig 3A
Fig 3B
1.
To fit: Raise the rear cover and hitch the grass catcher on rear of mower. (Fig. 3A)
(Fig.3B)
2.
To remove: grasp and lift rear cover, remove grass catcher.
5.4
Starter handle
Fig 4A
1.
Move the starter handle from the engine to the rope guide. (Fig. 4A)
The angle adjusting gear