Eagle Electronics CUDA 350 S/MAP - Manual (Page 163)

155
New Trail
To manually start a new trail in the Trails Menu, make sure
N
EW
T
RAIL
is selected and press
ENT
. You will be directed to the Edit Trail screen.
Trail Visible/Invisible and Other Trail Options
The name, active and visible settings and maximum number of points
in the trail, all are accessed on the Edit Trail menu. The Active setting
determines whether or not the unit is recording new points for a par-
ticular trail. On the Edit Trail menu, press
↓ ↑ to highlight the section
you want to change, then press
ENT
. Make your changes, then press
EXIT
to close this menu.
Units of Measure
This menu sets the units of measure used for Speed and Distance,
Depth, Temperature, Altitude and Heading.
To change units of measure:
Press
MENU
|
MENU
| ↓ to
S
YSTEM
S
ETUP
|
ENT
|
ENT
.
Units of Measure on System Setup menu (left).
Units of Measure Menu (right).
To set Units of Measure: Press ↓ to the desired units, then press
ENT
to turn a unit on or off
.
After all options are set, press
EXIT
|
EXIT
to re-
turn to the main page display.