Eagle Electronics CUDA 350 S/MAP - Manual (Page 78)

70
To turn off displayed data:
1. Press
MENU
| ↓ to
O
VERLAY
D
ATA
|
ENT
.
2. Press ↓ or ↑ to select Data Type, then press ← → until the checkmark
next the selected data type disappears. After you have turned off the
data type, you can use
↓ ↑ to select another data type.
3. To return to the previous page, press
EXIT
.
Sonar chart with Overlay Data turned on. This example shows
Depth, Water Temperature and the Ground Speed of the boat.
Ping Speed & HyperScroll ™
Ping Speed controls the rate at which the transmitter and transducer
broadcast sonar sound waves — pings — into the water. The unit has a
default ping speed of 50 percent. At normal boating speeds, this auto-
matically provides enough return echoes to refresh the screen and
scroll the chart at maximum chart speed.
But when you are running at high speeds or just want the fastest pos-
sible screen update, you may want to use the HyperScroll
™ feature.
When you change the Ping Speed to any setting greater than 50 per-
cent, the unit automatically enters HyperScroll mode.
These faster ping rates allow you to maintain a high-detail picture on
the screen.