Emerson 5-In-One Learning Light-Up Remote - Manual (Page 12)

12 Preparation
3. Press 9 9 6 . You can now use the remote for Chan-
nel Scan (see “Using Channel Scan” on Page 17).
4. Hold down P until the red light blinks twice.
PROGRAMMING MACROS
Your remote has four macro keys ( MUSIC , MOVIES ,
SPORTS , and NEWS ) that you can use to store up to
three channels per macro key for instant tuning of TV or
cable/satellite channels. For example, if your favorite
sports channel on your cable service is 061, you can
store it as an instant tune-in macro.
Follow these steps to program macros.
1. Hold down P until the red light blinks twice.
2. Press 9 9 5 to start the program.
3. Press the desired macro key ( MUSIC , MOVIES ,
SPORTS , or NEWS ).
4. Press CBL/SAT or TV to select the appropriate
device.
5. Press the numbers for the desired channel (for
example, for the sports channel in the previous
example press
0 6 1 or 0 0 6 1 ).
Note: If your original remote control requires you to
press Enter or Select to send a command, press
Enter or Select after entering your three- or four-
digit channel number.
6. Hold down P until the red light blinks twice to save
the setting.
If you want to add two more channels to the macro keys,
repeat Steps 1–6 twice, each time substituting another
channel number in step 5.
Note: You can only program three channels for each
macro key. Programming more than three channels will
overwrite one or more of your original channel settings.