Emerson 5-In-One Learning Light-Up Remote - Manual (Page 16)

16 Operation
learned the function ( TV , VCR , CBL/SAT , DVD , or
AUX ).
4. Press the key for the learned function you want to
delete twice. The LED blinks twice after the second
press.
5. To clear additional functions stored on other keys,
repeat Steps 1–4.
ˆ
Operation
Note: The command keys on the 5-In-One Remote work
the same as the keys on your original remote controls.
However, the labeling may be different.
USING THE REMOTE
Once you have completed programming your remote
(see “Preparation” on Page 8), you are ready to use your
5-In-One Remote.
1. Point the remote at the desired device and press the
device key ( TV , VCR , CBL/SAT , DVD , or AUX ). Then
press POWER to turn on the device.
2. Press the desired command keys.
3. Repeat Steps 1 and 2 for all other devices you want
to operate.
4. To turn off the last device you selected, press
POWER .
To turn off another device, press the device key,
then press
POWER . Repeat this step to turn off all
devices.
Note: You can program POWER as a master power key
to turn all devices on and off in a sequence. See “Pro-
gramming the Power Key” on Page 13.