Eaton Electrical Cutler Hammer MN05001002E - Manual (Page 15)

Intelligent Technologies QCPort System Install Manual
November 2005
MN05001002E For more information visit www.eatonelectrical.com Page 15
Methods of connection include using QCPort Interconnect Cable, QCPort Backplane,
Long Run, or any combination of the three.
Physical Placement
When planning the connection, care should be taken as to the physically placement of
the devices. Considerations include:
• Grouping IO to utilize the Backplane.
• Grouping devices that only use the QCPort Interconnect cable.
• Changing media as little as possible.
For most applications, it will be possible to require only one change in media.