Ecom Instruments Ex-Handy 05 - Manual (Page 21)

56
Using the Welcome menu, you can log onto your service provider‘s WAP site
by pressing the key. If you are logging onto the GSM or GPRS network, the
@ symbol flashes. The metering of the cost of the call starts as soon as it stops
flashing.
WAP Logging off
To log off, press the key. The logoff happens automatically after a few
seconds of inactivity if you forget to log off. This period is defined by the Linger
time setting.
GPRS
A flashing icon indicates that the phone is logging onto a GPRS network. A non-
flashing icon indicates that the GPRS network is available. If the icon is greyed
out, it indicates that the phone is logged onto the GPRS network. This icon is not
displayed if the GPRS network is not available or if the SIM-card inserted in your
phone does not support the GPRS service.
7.12 Applications
Services
This item may not be present on your phone’s menu, as it depends on the
inserted SIM-card.
Alarm
On the Applications menu, select the Alarm menu and [OK].
Select Activate or Deactivate and validate. Set the wake-up time by entering the
numbers directly or using the navigation stick and validate.
The alarm icon appears on the initial screen.
The alarm works even when the phone is switched off.
Timer
This menu is used to set and activate the timer.
On the Applications menu, select the Timer menu and [OK].
Select Activate or Deactivate and validate. Set the duration (hours/minutes) by
entering the numbers directly and validate.
The alarm icon appears on the initial screen.
ToDo
On the Applications menu, select ToDo and press [Options].
Select one of the actions in the list with the navigation stick and validate.
- Add Written ToDo/Add Vocal ToDo: allows you to add ToDo of the text or
voice type.
- Categories: allows you to see the different ToDo categories, assign a specific
ring tone to each individual ToDo, know the number of ToDo’s in each category