Ecom Instruments Ex-Handy 05 - Manual (Page 28)

63
Cost (Operator-dependent service)
This menu allows you to control the cost of your calls.
On the Security menu select the Cost menu and validate. The Cost menu (*)
lets you check the cost of the last call you made and of all the calls you made
since you last deleted them. The Delete costs menu (*) lets you delete the cost
of your last call and reset the cost counter. Enter your PIN2 code first.
Note: Depending on how the networks and associated subscription cards are
configured, some functions may be unavailable (these are marked out with *).
7.14.7 Networks
On the Settings menu, choose the Networks menu and [Select].
Choose Selection to activate (automatically or manually) one of the networks
accessible in the area where your are located.
Choose Preferred to view all the pre-registered networks.
Choose Network type to select your network.
Choose GPRS to select the way you want to be attached on the GPRS network
always, or only when needed (when launching a data connection).
7.14.8 Shortcuts
This menu allows you to allocate functions to the programmable keys: .
On the Settings menu, choose the Shortcuts menu and [Select].
Select the key that you wish to modify and validate.
Choose the function that you want to allocate to this key and validate.
7.14.9 Date / Time
Set Date/Time
On the Date / Time menu, select Set Date/Time and [Select].
Date: set the date by entering it directly in digital form or by using the navigation
stick. Once the date is correct, validate it.
Time: same procedure as for setting the date.
Automatic update (Operator-dependent service)
This menu allows you to choose manual or automatic updating of date and time
(after switch off of your phone or when going abroad for instance) (service de-
pending on the operator). On the Date / Time menu, select Automatic upd. and
[Select]. Select Automatic, Manual or On demand and press [Select].
Display
On the Date / Time menu, select Display and [Select].
In the list that appears, select the desired display type from the following:
- Analog,
- Digital,
- None.
Use the navigation stick for selecting the desired option and validate.