Enfora TicTalk - Manual (Page 20)

Device Basics
Battery
Your TicTalk phone comes with a built-in rechargeable Lithium Ion
battery. The battery is partially charged, but we recommend you fully
charge the new battery before you use your TicTalk phone for the first
time.
WARNING: Only use the USB cable provided with your TicTalk
phone to charge your battery, or you risk damaging your device.
You can plug the USB cable into your PC to charge your battery,
or you can use it with the power supply provided to charge at a
wall outlet. You can also use the optional mobile charger,
available at
http://www.mytictalk.com , to charge your TicTalk.
DO NOT remove the battery from the TicTalk. Doing so will void
the warranty.
Charge your battery from the wall outlet
Plug the USB cable from the power supply into the phone.
Then, plug the power supply into the wall outlet.
Plug the USB cable into the accessory connector of your
TicTalk phone.
NOTE: Your display shows the battery level while it is charging,
even if the phone is off. The red LED in the selector switch
illuminates while charging.
C o p y r i g h t 2 0 0 5 , E n f o r a L . P . 1 3