Charging the battery – Epson L-500V User Manual
Page 10
Advertising
10
Charging the Battery
Be sure to charge the battery before you use it the first
time or if you haven’t used it for a long time. Charging
takes about two hours. A fully charged battery lets you
take approximately 200 photos.
1
Connect the small end of the battery charger power
cable to the charger, then plug the power cable into
an electrical outlet.
2
Place the battery into the
charger. The charge light
comes on red. If it doesn’t
come on, reinstall the battery
in the charger.
3
When the charge light turns green, the battery is
fully charged. Remove the battery and unplug the
charger from the outlet.
Advertising