Epson L-500V - Manual (Page 12)

12
Removing a Memory Card
Note:
Your camera won’t store photos and some of its buttons
won’t operate without a memory card correctly installed.
1 Make sure the camera is turned
off, then slide the battery cover
until it pops up.
2 Push in the memory card to
release it. The card pops out.
3 Pull out the memory card, then
press down on the battery cover and slide it back
into place.
Installing the Battery
1 Turn the camera on its left side.
2 Slide the battery cover until it
pops up as shown:
3 Insert the battery into the
compartment, positioning it as
shown with the arrow facing
down. Press it down until it
clicks into place.