Epson L-500V - Manual (Page 19)

19
3 Center your subject in the middle of the square
focus frame on the LCD screen.
The default flash setting is automatic, indicated by
the
icon on the LCD screen. The flash will go off
automatically whenever necessary.
If you want to change the flash setting, move the
joystick to
r
. See page 23 for a list of flash settings.
4 Press and hold the shutter button halfway. The focus
frame turns green and the focus is set. If you want to
reframe your picture, move the camera until the
photo you want appears on the screen.
Note:
If the focus frame turns red and transparent instead of
green, adjust your position slightly and try again.
5 Press the shutter button all the way down. The
camera beeps as it captures the image.
Note:
To turn off the camera’s beep sound, turn the Mode dial
to SETUP, move the joystick to r twice, and select
Sound Off in the Sound Menu. See the on-screen
Reference Guide for details.