Electrolux EWF 6120 W - Manual (Page 12)

use 39
To restart the programme from the point
at which it was interrupted, press the
“start/pause” button again.
If you have chosen a delayed start, the
machine will begin the countdown.
If an incorrect option is selected, an
integrated red pilot light of the “start/
pause” button flashes for 3 times.
Select the Delay start
Before you start the programme
, if
you wish to delay the start, press the
Delay Start button repeatedly, to select
the desired delay. The relevant light
illuminates.
This button makes it possible to delay
the starting of the washing programme
by 9, 6 and 3 hours.
You must select this option after you
have set the programme and before you
press the Start/Pause button.
You can cancel the delay time at any
moment, before you press the
Start/Pause button.
If you have already pressed the
Start/Pause button, and you wish to
cancel the delay time, proceed as
follows:
• set the washing machine to PAUSE
by pressing the Start/Pause button;
• press the Delay Start button once, the
light relevant to the selected delay
goes off.
• press the Start/Pause button again to
start the programme.
Important!
• The selected delay can be changed
only after selecting the washing
programme again.
• The door will be locked throughout
the delay time. If you need to open
the door, you must first set the
washing machine to PAUSE by
pressing the Start/Pause button and
then wait about 2 minutes. After you
have closed the door, press the
Start/Pause button again.
The Delay Start can not be selected
with Spin and Drain programmes.
Programme progress display
By selecting the wash programme, the
“wash”
pilot lights comes on.
When the pilot light “wash” comes on
this means that the machine is
performing the washing cycle. If you
have selected the “prewash” function,
this light will be on during the prewash
phase too.
The “door”
pilot light indicates if
the door can be opened:
• light on: the door cannot be opened
• light off: the door can be opened
• flashing light: the door is opening
It stays on during the whole programme
indicating that the door is locked.
When the light goes out, the door can
be opened.
When the programme has finished, the
“End”
pilot light comes on.
126.2931.23…EWF6120W.qxd:- 10/03/09 15:42 Página 39