Emotiva ERM-6.2 - Manual (Page 12)

ERM-6.2/ERM-1 Custom Sound Tailoring Controls
1. Tweeter Level Adjustment
Cuts or boosts tweeter level. Settings
are: ‘+2’, ‘-2’ and ‘0’ (neutral position).
12
2. Boundary Compensation
Compensates for the ‘booming’, or
unpleasant increase in the upper
range of the bass, due to being close
to a wall or large piece of furniture.
Settings are: ‘On’, which reduces
400Hz by about 10db, and ‘Off’
(neutral position), which leaves all
lower frequencies unaffected.
3. Five-way binding posts
Connects the speaker to the
amplifier(s). Accepts banana plugs,
spade lugs, pin posts, and bare wire.
Gold plated to prevent corrosion.
4. Bi-amp terminal links
(1) When powering the speaker with a
single amplifier or single amplifier
channel, use only one connection
each on the negative and positive
binding posts. Make sure that the Bi-
amp terminal links are securely in
place. (2) When using two discrete amplifier or amplifier channels per speaker (Bi-amping) remove
the Bi-amp terminal links and use all connections: one positive, and one negative per amplifier or
amplifier channel. Warning: Failure to remove the bi-amp shorting posts before bi-amping
could result in serious damage to your amplifier. More on Bi-amping: Page 17