Emotiva ERM-6.2 - Manual (Page 22)

In a bi-amped connection, two discrete amplifier channels are connected per speaker. This allows the
power to be delivered with different levels to tweeters than to the woofer drivers. The passive crossover
network still handles the filtering so active preamplifier LP/HP filtering that would take the place of the
passive network is not necessary.
• Tweeter Connection
Connect the positive output of the tweeter amplifier to the positive speaker binding post labeled
"Tweeter". Connect the negative output of the tweeter amplifier to the negative binding post labeled
"Tweeter".
• Woofer Connection
Connect the positive output of the woofer amplifier to the positive speaker binding post labeled
"Woofer". Connect the negative output of the woofer amplifier to the negative binding post labeled
"Woofer".
22