Emotiva ERM-6.2 - Manual (Page 13)

ERD-1 Front and Back Views with Expanded Control Panel
1. Mounting Screws
These are used to attach the ERD-1 to the wall mounting plate. They are not intended to sit
flush with the cabinet. (details on wall mounting ERD-1 speakers: page 20)
2. Bi-pole/Di-pole Configuration Switches
Customizing controls to define the Bi-pole/Di-pole role of the speaker (details: page 14)
3. Five-way binding posts
Accepts banana plugs, spade lugs, pin posts, and bare wire. Gold plated to prevent corrosion.
ERD-1Technical Specifications
• One 5.25" Woofer, Two 25mm tweeters
• Sensitivity: 89db (2.83volts @ 1 Meter)
• Recommended amplifier power: 50-200 Watts RMS
• Frequency response: 80-20Khz +/-2db
• 4.25" deep x 13" wide x 9.5" high10.1 lbs (each), 29.5 (boxed, pair)
13