Crivit V210 - Manual (Page 4)

7 8
Toxproof
The Toxproof-sign of the Technical Inspection Authority (TÜV) Rhineland
identifies products that have been tested for toxic substances where no
health hazards can be expected according to the perception of today.
Inside Padding with Coolmax Inserts
Coolmax® by INVISTA is a high-performance fabric fibre that supports
its wearers during sport activities. Based on the patented DuPont-fibre
technology, Coolmax® transports moisture from the body to the fabric surface where it dries
quicker than with any other fabric.
The specially developed fibres of INVISTA that are used for Coolmax®-fabrics transport the
moisture away from the body to the surface of the fabric where it has the opportunity to evapo-
rate quickly. At the same time the uniquely formed fibres offer maximum breathing activity,
even in wet conditions. In addition the breathing activity improves the heat regulating effect.
Pure by HeiQ®
The inside padding is made with newly developed Pure Technology.
Pure is an anti-bacterial odour inhibitor featuring silver microcomposite particles
for sports and recreational garments developed and manufactured by the Swiss
High-Tech company HeiQ®.
The micro fibres of the helmet lining are made with an innovative, anti-bacterial effective silver-
technology. The anti-bacterial effect of silver has already been well-established for centuries.
HeiQ® has further fortified these characteristics to effectively and permanently prevent an
odour formation.
Anti Fog
The visor and the sun shade feature an anti-fog coating.
The anti-fog coating is the result of a special surface treatment that is used for
motorcycle visors among other things. This special coating prevents that the visor
fogs up quickly with breathable air. For these products this increases user safety.
Anti Scratch
To reduce the risk of scratching, the built-in visor and the replacement visor fea-
ture a special coating. This coating prevents rapid scratching of the external part
of the visor.
Spectacle Wearers
The helmet is also suitable for spectacle wearers.
The wearing comfort for spectacle wearers improves with the passage formation in the pad-
ding (spectacle wearer passage).
Removable Inner Lining
The inner lining can be completely removed and
cleaned separately (see care instructions).
To remove the inner lining, firstly remove the helmet
collar and the cheek pads. Then undo the back press-
studs of the inner lining and pull the clips of the inner
lining from the front side of the helmet ( see Fig. B ).
Chin-Wind Deflector
The chin-wind deflector is attached to the helmet pad-
ding with a Velcro-strip.
This can be removed and re-attached as required ( see
Fig. C ).
Snap-Fastener System
The snap-fastener enables an individual and quick
vernier adjustment of the chin strap.
Press the snap-fastener together until the helmet is sit-
ting comfortably but firm ( see Fig. D ).
Sun Shield
The integrated sun shield will enable you
to quickly and easily react to changed
light conditions with the aid of the pat-
ent mechanism.
The slider (15) enables you to set the
required height of the sun shield ( see
Fig. E ).
Note:
- Please take care that the edge of the sun shade does
not block your field of vision.
- The sun shade may only be used in combination
with the visor.
Acoustic Damping
The acoustic damping is for noise reduction, in par-
ticular when driving at high speeds.
Press the acoustic damping into the cavity of the cheek
pads ( see Fig. F ). The smooth, darker side of the pad
always points to the inside of the helmet.
C
B
D
E
F