EverFocus EQ550 - Manual (Page 22)

- 21 -
6.8.5 PRIVACY
This mode covers the areas you do not want to see on the screen.
1) Please direct the arrow to point to “PRIVACY” by using the UP or DOWN
button.
2) Select “ON” by pressing the LEFT or RIGHT button.
3) Press SETUP button.
z Please select the area you would like to cover from the 4 areas in AREA SEL mode.
z Please select ON mode for the chosen area.
z Please select AREA TONE for cover area. The larger the number, the lighter the
cover area.
z Please use the UP or DOWN button to move between TOP, DOWN, LEFT and
RIGHT for adjusting the size of the area to be covered.
z Please use the LEFT or RIGHT button to adjust the value for size of the area to be
covered.
z
Additionally, it is possible to change the position of the area to be covered. Please
refer to the following example for detailed steps on moving AREA1 to center.
PRIVACY
> AEREA SEL AREA1
AREA STATE. OFF
AREA TONE |+++++++++| 80
TOP
|++++++++| 10
DOWN |+++++++++| 25
LEFT |+++++++++| 20
RIGHT |+++++++++| 40
SPECIAL
CAMERA ID OFF
COLOR ADJ.
<┘
SYNC. INT
MOTIION DET OFF
> PRIVACY ON <┘
MIRROR OFF
SHARPNESS ON <┘
RESET
RETURN <┘
AREA1 AREA2
AREA3 AREA4