EverFocus EQ550 User Manual
Page 9
Advertising
- 8 -
4. CONNECTION
1. Connect the cable from keyboard’s RS485 port to camera’s RS485 port.
2. Connect the cable from video output jack of the camera to monitor’s input jack.
3. RS485 ID of Polestar has to be the same as CAM ID of the keyboard. (Please refer to
“
6.3 How to set RS485 ID & Baud rate?”
for RS485 ID setup detail)
4. Baud rate of Polestar has to be the same as Keyboard’s baud rate. (Please refer to “
6.3
How to set RS485 ID & Baud rate?”
for baud rate setup detail)
485
Advertising