Emotiva UPA-7 - Manual (Page 23)

Each RED light indicates a fault condition for the corresponding power module.
A fault condition is one or more of the following:
• Excessive Operating Temperature
• Excessive Current (Short Circuit)
• DC on the Outputs
An excessive temperature fault can be reset by allowing amplifier to cool and cycling power on/off button
on the front panel. Excessive current (short circuit) can be reset by removing the cause of the short and
cycling power on/off button on the front panel. DC at output is a possible fault condition that is equipment
related and requires technical assistance. Please contact Emotiva if you have repeated problems
causing the RED front panel light to flash that are NOT thermal or short circuit related.
Problems with the whole A/V System
If you are having more complex problems in your overall home entertainment system (not just with the
UPA-7 amplifier), please contact Emotiva for UPA-7 professional installation assistance. Emotiva
professionals have years of experience with a wide range of home entertainment and lifestyle products
and can assist you in troubleshooting and rectifying problems.
23