Emotiva UPA-7 - Manual (Page 9)

Unpacking the UPA-7
The Emotiva UPA-7 Amplifier should reach you in flawless condition. If you notice any shipping damage
or other issues upon unpacking the unit, please contact your Emotiva Retailer immediately.
Inventory
Included with your UPA-7 amplifier should be an IEC Class 1, 2 prong power cord, and this
User’s Guide. Please take a moment to make sure all the items are there in the packaging.
Gently lift out the unit and remove all the packing material and accessories. This amplifier is
heavy, so please unpack it carefully to avoid unnecessary injury or damage to the amplifier. It is
important to save all the packing materials and the box in case your Emotiva UPA-7 ever needs
to be moved or shipped back to the factory for service.
Emotiva UPA-7 Seven Channel Amplifier Features:
• Audiophile quality seven channel multi-channel power amplifier.
• Seven 125 watt channels of amplification
• Low noise 850 VA torrid power transformer
• Complementary, discrete power amplifier design incorporating high current, high speed,
On Semiconductor power devices
• Channel status indicators for standby, operate, and fault
• Completely stable into 4 ohm loads
• Signal to Noise Ratio is greater than 100dB, unweighted ref. full output
• THD .03% at rated power, 20Hz – 20kHz
• Fully protected from all fault conditions
• Soft start circuitry
• External trigger turn on
• Soft touch power switch
• 4RU chassis w/ solid milled aluminum faceplate
• IEC power inlet, 115/230 VAC Auto configurable
9