Eltax AVR-800 - Manual (Page 16)

Radio Reception
15
Select the TUNER mode by turning the FUNCTI ON selector. 1
Select the station you want to listen to (auto selection). 4
Hold down the TUNI NG button for 0.5 to 2 seconds.
When a station is tuned in, the tuning process will stop
automatically.
Press the TUNI NG button to stop the auto selection.
< Selecting stations which cannot be tuned automatically
(manual selection)
Press the TUNI NG button repeatedly or hold it down and
release it when the station you want to listen to is found.
When t he TUNI NG but t on is pressed moment arily ( 0.5
second or less), the frequency changes by a fixed step.
< "STEREO" is displayed when a stereo broadcast is tuned in.
< "TUNED" is displayed when a broadcast is correctly tuned
in.
FM: 50 kHz steps
AM: 9 kHz steps
Press the MODE (TUNI NG) button to change to TUNI NG
mode.
The "PRESET" indicator disappears from the display.
< This button is used to select Tuning or Preset scan mode.
3
Select the AM or FM by pressing the BAND button. 2
3 4
2 1
Radio Reception (1) Radio Reception (2)
FM MODE Button
Pressing this button alternates between Stereo mode
and Mono mode.
Stereo
FM stereo broadcasts are received in stereo and the
STEREO indicat or light s in t he display. I f FM
broadcasts with weak signal strength are received, the
FM muting function works automat ically to cut the
signals, eliminating loud noise.
Mono
To compensate for weak FM stereo reception, select
this mode. Reception will now be forced monaural,
reducing unwanted noise.
A
A