Eltax AVR-800 - Manual (Page 27)

Specifications
26
Amplifier Section
Output Power
Stereo Mode : 120W/ CH
(1% THD 1KHz 8ohm DI N)
Surround Mode : 92W/ CH
(1% THD 1KHz 8ohm DI N)
THD : 0.01%
DOLBY DI GI TAL Mode:
Surround : 0 ~ 15 ms
Center : 0 ~ 5 ms
Back surround : 0 ~ 20 ms
DOLBY PRO LOGI C Mode (Surround):
Music : 0~ 5 ms
Movie : 10~ 25 ms
Emulation : 10~ 25 ms
Frequency Response:
* LI NE: 10 Hz 70 kHz, + 1/ 3 dB
Signal-to-Noise Ratio:
* LI NE: 100dB (I HF-A)
Tone Control:
BASS: ± 10 dB at 100 Hz
TREBLE: ± 10 dB at 10 kHz
Digital Audio Section
Sampling Frequency: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
DI GI TAL Input Level/ Impedance:
DI GI TAL 1, 2 (OPTI CAL): 15 dBm 21 dBm
DI GI TAL 3 (COAXI AL): 0.5 Vp-p / 75 ohms
FM Tuner Section
(Without notes 100.1 MHz, 65 dBf)
Tuning Range:
87.5 MHz 108.0 MHz (50 kHz steps)
Usable Sensitivity (I HF):
Mono: 11.2 dBf
50 dB Quieting Sensitivity:
Mono: 15.3 dBf
Stereo: 38.5 dBf
Capture Ratio: 2.0 dB
Image Rejection Ratio: 45 dB
AM Suppression Ratio: 55 dB
Total Harmonic Distortion (1 kHz):
Mono: 0.2%
Stereo: 0.3%
Frequency Response: 30 Hz 15 kHz, + 1/ 1.5 dB
Stereo Separation (1 kHz): 40 dB
Signal-to-Noise Ratio:
Mono: 70 dB
Stereo: 65 dB
AM Tuner Section
Tuning Range:
522 kHz 1,620 kHz (9 kHz steps)
Usable Sensitivity: 55 dB/ m
Total Harmonic Distortion: 0.8% at 85 dB/ m
Signal-to-Noise Ratio: 45 dB at 85 dB/ m
Video Section
Input Sensitivity/ Impedance: 1.0 Vp-p/ 75 ohms
Output Level/ Impedance: 1.0 Vp-p/ 75 ohms
General
Power Requirements:
230 V AC, 50 Hz
Power Consumption:
320W
AC Outlets:
Switched x 1, 100 W max.
Dimensions (W x H x D)
435 x 165 x 350 mm (17-1/ 8" x 6-1/ 2" x 13-3/ 4")
Weight (net):12Kg
Standard Accessories:
AM Loop Antenna x 1
FM Antenna x 1
Remote Control Unit x 1
Ower s Manual x 1
* LI NE means CD, TAPE, VCR/ VI D 1, TV/ VI D 2, AUX/ VI D 3 and
DVD/CD.
< I mprovements may result in specifications and features
changing without notice.
< I llustrations may differ slightly from production models.