Sealey AK436 - Manual (Page 3)

3.1. CHANGING THE SPOTLIGHT BULB

WARNING! Ensure the spotlight is turned off and the lens has cooled
prior to changing the bulb.
1. Undo the spotlight hood (fig.1.H) by turning it anti-clockwise.
2. Carefully lift the reflector assembly revealing the spring clip (fig.5.1)
and the cable connector (fig.5.2).
3. Disconnect cable (fig.5.3).
4. Squeeze the two ends of the spring clip together and remove the
spring clip (fig.5.1).
5. If unable to remove bulb, first remove screw and nut (fig.5.5)
6. Pull bulb (fig.5.4) outward from the reflector.
7. Hold the new bulb with a lint free cloth, (do not handle the bulb),
and install by reversing the above procedure.
 WARNING! Beware of causing a short circuit.
3. MAINTENANCE
1
2
3
5
4
Part No. Description
AK436.V3-01 Bulb - Halogen H3 6V 55W
AK436.V3-02 Mains Charger
AK436.V3-03 Battery
AK436.V3-04 Switch
AK436.V3-05 Car Accessory Charger Lead
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging should be sorted, taken to a recycle centre and disposed of in a manner which is compatible with
the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste
authority for recycling information.
Battery Removal
 WARNING! Ensure the spotlight is turned off before removing the battery
1. Remove the screw on the back of the lamp and remove the back cover.
2. Slide out the battery and remove the wires from the battery termials, removing the black negative first.
Dispose of battery according to local authority guidelines.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme.
Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park ,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
email
Original Language Version AK436.V3 Issue: 2 - 18/01/12
4. PARTS
fig.5