Ecom Instruments ECOM-EF24F2G - Manual (Page 34)

5 Management Software Guide
26
Refresh button
Read the VLAN table registers. If you can have configured VLAN but it doesn’t show on the table,
please press the button
Add VLAN button
Click the ADD VLAN button will pop up a configuration window below. Select port base or tag
base VLAN, then check the port where you want to configure the settings. For Tag Base VLAN,
please enter a VLAN ID number.
Port Tagging Control button
Press this button you will see a dialog like follows. To configure a port, please double-click the port
you want to configure.
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0