Ecom Instruments ECOM-EF24F2G - Manual (Page 9)

1 Product Overview
1
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
1
Product Overview
Introduction
Windows Remote Management software
Conventionally, configuring a switch's smart management will require users to attach the computer
(serial or printer port) directly to the switch's console port. With ECOM-ES24F2G's in-band
management capability, users can configure the switch through the Ethernet network. The included
Windows management software provides a very simple point-and-click interface to set all the
functions. Users can even backup settings to be restored in the future. Best of all, the management
utility can configure several switches using the same utility.
Management Features
The ECOM-ES24F2G is equipped with many practical management functions.
Per-port bandwidth control
allow limiting the outgoing and incoming bandwidth separately for each port .
Central Switch management:
Configure several switches at the same time.
802.1Q tag VLAN
enables VLAN assignment across different switches.
VLAN filter
provide controls to let single-cast, multi-cast, or broadcast traffic to pass between
VLANs.
Quality of Service
for multimedia applications: the 802.1p compliance provide priority traffic
management based on port, vlan-tag, or TCP/IP TOS information.
Link aggregation
The LACP(Link Aggregation Control Protocol) increase the uplink speed by allowing
several ports(Trunk Group) to link between the switches. The switch allows up to 7
trunk groups in 2 or 4 ports. Please make sure that switches on both side are setup for
the trunking function.
IGMP Snooping
for IP multicast group management