Sealey SAC82425VLN - Manual (Page 5)

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
imporTANT: no liability is accepted for incorrect use of this product.
wArrANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
iNFormATioN: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
sole UK Distributor, sealey Group,
Kempson Way, suffolk Business Park ,
Bury st. Edmunds, suffolk,
iP32 7Ar
www.sealey.co.uk
Web
email
6. TroUbLe sHooTiNG
Original Language Version sAc89025VLn, sAc82425VLn issue: 2 - 22/02/12
Fault cause remedy
Pressure drop in the tank Air leaks at connections run compressor to max. pressure, switch off.
Brush soap solution over connections and look for
bubbles. tighten connections showing leaks.
if problem persists contact Authorised service Agent.
Pressure switch valve leaks when compressor is
idle
non-return valve seal defective Empty the air tank, remove the non-return valve cap
‘A’ (fig.9) and clean. if necessary,
replace the seal ‘B’.
compressor stops and does not restart overload cut-out operated - motor overheating Wait for motor to cool and restart.
compressor stops and does not restart motor failure contact Authorised service Agent.
compressor does not stop at max. pressure Pressure switch fault contact Authorised service Agent.
compressor does not reach max. pressure filter clogged
Head gasket or valve fault
replace filter element.
contact Authorised service Agent.
compressor noisy with metallic knock Bearing or piston damage contact Authorised service Agent.
parts support is available for this product. To obtain a parts listing and/or diagram, please log on to
www.sealey.co.uk, email [email protected] or phone 01284 757500.