Sealey GSS3030 - Manual (Page 13)

7.4 ASSEMbLE THE FRONT WALL PANELS.
7.4.1 Attach component 41C (jamb) to panel 13L and component 41B (jamb) to panel 13R using self tapping screws,
in the configuration shown below.
7.4.2 Attach top channels 27P, 27N and component 43 (jamb) to panels 13L and 13R using self tapping screws,as
shown above. Apply a channel connector (66) to reinforce the joint between the two top channels. (Note that
screws are fixed to both sides of the connector). Now attach bottom channels 27L, 27M and component 28 to
panels 13L and 13R using self tapping screws. (Note that screws are fixed to both sides of component 28, at
the centre, in order to tie together the two bottom channels 27L & 27M).
© Jack Sealey Limited
Original Language Version GSS3030 Issue No.1 13/08/12