Safety advice / operation, Operation using the lamp, Replacing a bulb – Livarno 7596-01хL User Manual

Page 11

Advertising
background image

11

GB

Safety advice / Operation

Position the lamp so that it is protected from moisture and dirt.

Never leave the lamp operating unattended.

Use the above-indicated bulbs only.

CAUTION! RISK OF INJURY! If protective glass is
broken, replace prior to using the lamp again.

Operation

Using the lamp

Always ensure that there is at least 20 cm clear distance between
the lamp and other items of furniture or furnishings.

Unwind the mains cable

4

completely before use.

Insert the mains plug into the socket.

Set the lamp head

1

to the desired height with the telescopic arm

5

.

Set the lamp head

1

in the desired position with the adjustment

lever

2

.

CAUTION! DANGER OF BURNS! If the lamp is switched on,

adjust the lamp head

1

with only the adjustment lever

2

. Do

not touch the lamp head

1

. The lamp head

1

gets very hot

when the lamp is switched on.

Set the ON / OFF switch

3

into position

I to switch on the device.

Set the ON / OFF switch

3

into position

0 to switch off the device.

Replacing a bulb

CAUTION! DANGER TO LIFE FROM ELECTRIC SHOCK!

Pull the mains plug out of the socket.

Advertising
This manual is related to the following products: