Livarno 7596-01хL - Manual (Page 12)

12 GB
Operation / Cleaning and maintenance
Note: To do this you will require a crosshead screwdriver.
Allow the bulb 8 to cool down completely.
Note: Ensure that the lamp shade 7 does not fall out when the
last screw 6 is released.
Screw out the screws 6 in the direction and completely
remove all the glass-retainers.
Remove the lamp shade 7 .
Use a clean, fluff-free cloth when you are replacing a bulb.
Draw the defective bulb 8 out of the socket.
Then insert a new bulb (max. 20 W) into the socket.
Note: Ensure that the pins are correctly engaged in the socket.
Place the lamp shade 7 back into the recess.
Screw in the screws 6 in the direction .
Note: Ensure that the brackets of the glass-retainers rest properly
against the lamp shade
7 .
Cleaning and maintenance
CAUTION! DANGER TO LIFE FROM ELECTRIC SHOCK!
Before cleaning, always pull out the mains plug out of the socket. For
electrical safety reasons, never clean the lamp with water or other
fluids or immerse it in water.
Do not use solvents such as petrol and the like as they could
damage the lamp.
Use a dry, fluff-free cloth for cleaning.
The lamp is maintenance-free.