Silvercrest SEF 2300 A1 - Manual (Page 79)

76 SEF 2300 A1
GB
MT
■ However, do not use the oil or fat for longer than six months. Always follow
the instructions given on the packaging.
■ As a general rule, oils and fats cannot be used so often if you mainly fry
foods with lots of proteins, such as meat or fi sh.
■ Do not mix fresh oil with old oil.
■ Change the oil or fat if it foams on being heated, if it develops a strong taste
or odour, if it becomes dark and/or if it develops a syrupy consistency.
Heat protection function
In a case of overheating, the heat protection function switches the appliance off .
This can happen if there is no, or not suffi cient, oil or fat in the deep fat fryer or
when solid cooking fats are being melted in the appliance.
When using solid cooking fats, the control and heating element 0 cannot give
off the heat that is generated quickly enough.
If the heat protection function has switched the appliance off , please proceed as
follows:
1) Allow the appliance to cool down.
2) Leave the oil or fat to cool (the fat should just be liquid).
3) Open the appliance lid by pressing on the lid release button 4.
4) Remove the frying basket 6.
5) Remove the operating/heating element 0.
6) Place the operating/heating element 0 in a clean and dry location.
7) Carefully press the reset button on the control and heating element 0 with a
small pointed object.
The appliance can now be used again.
IB_102781_SEF2300A1_LB5.indb 76 IB_102781_SEF2300A1_LB5.indb 76 25.08.14 10:15 25.08.14 10:15