Silvercrest SGB 1200 A1 - Manual (Page 59)

56 SGB 1200 A1
GB
MT
Operating the appliance
Function switch
You can switch on the appliance using the function
switch 4, and can also set three diff erent func-
tions:
Symbol Meaning
"Top heat"
e.g. for grilling
"Bottom heat"
e.g. for baking cakes
"Top & bottom heat"
e.g. for baking pizza
OFF
"OFF"
The appliance is switched off .
Temperature control
■ Use the temperature control 3 to set the desired
temperature.
Timer
Use the timer 5 to set the cooking time.
■ Set the timer 5 to the desired cooking time.
Once the set time has elapsed, a beep sounds
and the appliance stops heating.
NOTE
You can also use the timer 5 as a short-period
timer without the heating function.
–
Set the function switch 4 to OFF .
–
Set the desired time on the timer 5.
The switch of the timer 5 now rotates anticlock-
wise to "OFF". A beep sounds when the set time
has elapsed. The appliance does not heat up.
Grilling and baking
CAUTION! MATERIAL DAMAGE!
► Never place any containers or food directly
onto the fl oor of the appliance, the heating
elements or the crumb tray 8.
1) Place the crumb tray 8 in the appliance.
2) Remove the rack 9 and baking tray 0 from
the appliance. If required, cover these with
baking paper or grease the baking tray 0
with fat/oil that is suitable for baking.
NOTE
► The oven must be pre-heated appropriate
to each dish. Refer to the guidelines in the
respective recipe. Pre-heating is useful for:
–
very short baking times,
–
crisp crusts,
–
delicate dishes that require a constant
temperature, such as souffl és.
► If no pre-heating is required, skip step 3).
3) Allow the appliance to heat up until it reaches
the desired temperature (this takes about
10 minutes, depending on the temperature
setting):
–
Select the desired temperature using the
temperature control 3.
–
Then select the required function using the
function switch 4.
–
Use the timer 5 to set the preheat time
(approx. 10 minutes).
–
Close the glass door.
IB_102858_SGB1200A1_LB5.indb 56 28.10.14 16:16