Silvercrest SMW 900 EDS A1 - Manual (Page 83)

- 81 -
Before the first regular usage of the microwave oven
the appliance must be heated up to remove any
remaining production residues.
After inserting the mains plug into the socket, open
the microwave door.
Without foodstuffs or accessories (turntable 3 and
grill stand t), switch the appliance on in the mode
Grill:
• Press the button Grill 7 twice. With this,
you have chosen to use the grill with top and
bottom heat. In the display 1 the symbol
and the symbol
appear.
• Adjust the control dial 0 to a cooking time
of 10 minutes.
• Press button Start/Quickstart 0 to start
the grilling process.
Take note:
On the first usage, the generation of light smoke
and a slight smell can occur, this is due to the pro
duction residues. This is unharmful. Provide for suf
ficient ventilation. For example, open a window.
• After 10 minutes, the appliance switches itself
off automatically. Wait until it has cooled down
completely.
• Remove the plug from the mains power socket
then, after cleaning the appliance with a moist
cloth, dry it carefully.
Inserting the turntable 3
• Place the turntable 3 centrally on the axle in the
cooking area. Ensure that it slides completely
onto the axle and is firmly seated.
Operation
Setting the Clock
After inserting the mains plug into the socket, open
the microwave door once. The display 1 indicates
"1:00".
1. Press the button Clock 8 . In the display
appears 1 "Hr 24". Press the button Clock 8
once again should you wish to switch to
the 12 hour mode.
2. By turning the control dial 0 programme in the
current hour.
3. Press the button Clock 8 . The minutes
value blinks.
4. By turning the control dial 0 programme in the
current minute.
5. When the correct time is programmed in, press
the button Clock 8 . The colon blinks
to indicate that the clock is running.
To read off the current time when the microwave
oven is in operation, press the button Clock 8
;
the time will then be indicated in the display 1 for
approx. 4 seconds.
Dormant mode
The microwave automatically switches itself into a
dormant mode if no keys are pressed for a long
time. The display lighting is first dimmed slightly.
Press any button to exit the dormant mode and to
call up the appropriate function of the pressed button.