Silvercrest SMW 900 EDS A1 - Manual (Page 93)

- 91 -
5. Press the button Start/Quickstart 0 to
commence the cooking process.
Note
If you are preparing pizza, you can place it directly
on the turntable 3. It will be very crispy. Ensure that
the edge of the pizza does not extend to the walls of
the cooking area during preparation.
Example:
Proceed as follows to cook a deep frozen, 450 g
heavy pizza:
1.
In standby mode turn the control dial 0 slowly
to the left until "A 03" appears in the display 1.
2. Press the button Start/Quickstart 0 .
3. Using the control dial 0 select the programme
"P 01".
4. Press the button Weight/Kitchen Timer w
repeatedly until 450g appears in the
display 1.
6. Press the button Start/Quickstart 0 to
commence the cooking process. The appliance
calculates the time required automatically.
Memory function
Use the memory function if you wish to carry out
up to 3 processes, one after the other. .
After finishing a process, the acoustic signal sounds
once and the next process starts immediately.
Note
The automatic menu programmes defrosting by
time and defrosting by weight cannot be saved.
To save three events in succession, proceed as
follows:
1. Programme in the first operation. For instance,
a microwave process, at 900 W power, for 2
minutes. "2:00", "M1" and
appear in the
display 1. Do NOT then press the button
Start/Quickstart 0
!
2. Programme in the second operation. For example,
a grilling, with bottom heat, for 3 minutes. "3:00",
"M2" and
appear in the display 1. Do
NOT then press the button Start/Quickstart 0
!
3. Programme in the third operation. For example,
a convection process, at 200°C, for 2 minutes.
"2:00", "M3" and
appear in the display
1.
4. To start, press the button Start/Quickstart 0
.
The microwave starts the first operation. When an
operation is completed, you will hear a signal tone
and the oven automatically starts the next opera
tion.