Silvercrest SRD 250 A2 - Manual (Page 18)

16 SRD 250 A2
GB
IE
Troubleshooting
Troubleshooting
In this chapter you will receive important information for the locali-
sation of malfunctions and their remedies. Observe the instructions
in order to avoid danger and damage.
Malfunction causes and remedies
The following table will help with localizing and remedying minor
malfunctions:
Defect Possible cause Solution
Appliance
does not
switch on.
The plug is not
inserted. Insert the plug into the
mains power socket.
Mains power socket
is not supplying
power.
Check the circuit fuse.
No sound
The volume is set to
minimum.
Increase the sound
volume with the
VOL regulator
18
.
Noisy radio
reception
The radio station
is not properly
tuned in. Tune in the radio station
properly with the TUNING
regulator
7
.
Reception is
too weak.
Try to improve reception
by moving the wire
antenna
8 .
NOTE
If you cannot solve the problem with the aforementioned ►
methods, please contact Customer Service .
B_66666_SRD250A2_GB3u6 indd Abs2 16 15 06 2011 10 18 18 Uhr