Silvercrest SLB 450 A2 - Manual (Page 14)

12
Handling and operation
SLB 450 A2
GB
Electrical connections
DANGER
Risk of fatal electrocution!
Contact with wires or components carrying mains power could
be potentially fatal!
Observe the following safety notices to avoid risks from electrical hazards:
Do not operate the appliance if the power cable or the plug are damaged. ►
Connect the appliance only to an electrical outlet protected by an FC ►
protector switch (RCD) with a rated residual current not exceeding 30 mA.
Never touch the pump and the mains plug with wet hands.
►
Avoid water contact with the pump. ►
Place the pump at least 60 cm away from the bath tub. ►
Under no circumstances should you open the housing of the appliance. ►
Should live connections be touched and/or the electrical and mechanical
construction changed, there is a risk of receiving an electric shock.
Insert the plug into a mains power socket. ♦
Handling and operation
In this chapter you receive important information for the handling and operation
of the appliance.
Switching On and Off
Switch the pump ♦ on with one press of the function button 3 on the
pump.
Switch the pump ♦ off with several presses of the function button 3 on the
pump.
NOTICE
In the same way, the pump may be switched on or off using the remote ►
control 9 by pressing the function button 10 .