Silvercrest SLB 450 A2 - Manual (Page 16)

14
Handling and operation
SLB 450 A2
GB
Function selection with the remote control
IMPORTANT
Risk of damage from water intrusion.
Never submerge the appliance or the remote control in water
or other fl uids. The appliance or the remote control could be
irreparably damaged.
Using the suction cups on the back of it, attach the remote control onto the ►
tiles next to your bath tub.
NOTICE
To ensure faultfree operation of the remote control ► 9 , it must be held during
operation so that it points directly to the pump .
Switch the pump ♦ on with one press of the function button 10 . The LED
operation indicator 5 on the pump blinks green, and the pump is operating
at the lowest level of intensity.
By once again pressing the function button ♦ 10 the LED operation indicator 5
on the pump blinks red and the pump switches to the high intensity level.
By pressing the function button ♦ 10 once again, the appliance switches into
the programme mode. The LED operation indicator 5 on the pump blinks
orange, and the appliance is now working in the massage mode. With this,
the appliance works by alternating between the low and high intensity levels.
Press the function button ♦ 10 a fourth time to switch the appliance off .
The LED operation indicator 5 on the pump extinguishes.
NOTICE
The appliance switches off automatically after 20 minutes usage time. ►