Silvercrest SVG 2.0 A1 - Manual (Page 12)

English SilverCrest USB 2.0 Video Grabber SVG 2.0 A1
10
 Connect the audio output of your source to the Video Grabber. To this
purpose use the red and white RCA connectors of the Audio/Video
cable (4).
 Plug the Video Grabber's USB connector into a free USB 2.0 port, ensuring
your PC is switched on. Use the enclosed extension cable (6) if necessary
to extend the reach of the cable. If possible, ensure that the Video Grabber
is directly connected to your PC (not via a USB Hub). Only use the device
with a USB 2.0 port.
 The operating system will automatically detect the Video Grabber. Follow
the instructions on the screen.
 Use the enclosed software to record from your source. The software
provides detailed usage instructions in electronic format. Start the relevant
program.