Silvercrest SHBS 1000 A1 - Manual (Page 77)

77 GB/MT
Cleaning and care
j  Never touch the mains adapter with wet hands when you insert
or pull out the adapter from the mains socket.
j  Always keep the mains adapter and connection lead dry.
WARNING! Do not immerse the hair and beard clippers in
water or other liquids for cleaning as the device is not waterproof.
Failure to observe this advice could damage the electrically conducting
parts (rechargeable batteries).
Q 
Cleaning the housing
j  Clean the housing using a slightly moist cloth.
Q 
Cleaning your hair and beard clippers
j  Switch off the hair and beard clippers by pressing the ON / OFF
switch
3 .
j  Disconnect the lead from the device and pull the plug-in mains
adapter out of the mains socket.
j  Take any fitted cutting length comb attachment 6 off the device.
j  Wash the cutting length comb attachments 6 when necessary by
holding them under flowing water.
j  Then fully dry the attachments.
j  Using your thumb from the front of the device, press against the
teeth of the cutter head to release the blade set
1 from its mount
(see Fig. B).
j  Use the supplied cleaning brush to remove any remaining hair
residue from the blade set
1 .