Silvercrest SHBS 600 A1 - Manual (Page 56)

56 GB/MT
Use / Cleaning and Care
Q
Cutting to shape the hairline, neck and sideboards
j Turn the device over so that the back is facing upwards.
j Place the edge of the cutter head 2 without an attachment 1 at the desired height for
the hairline.
j Move the switched-on hair and beard clippers downwards.
Q
Cleaning and Care
CAUTION!
DANGER OF ELECTRIC SHOCK!
WARNING! As the device is not waterproof, the hair and beard clippers should not be
immersed in water or other liquids when cleaning it. This could lead to live parts (rechargeable
batteries) being damaged.
j Remove the AC adaptor plug from the socket before cleaning the hair and beard trimmer.
j Never touch the AC adaptor plug with wet hands when you are inserting it into or removing
it from the socket.
j Keep the AC adaptor plug and cable dry at all times.
Q
Cleaning the housing
j Clean the housing using a slightly moist cloth.
Q Cleaning the hair and beard clippers
j Switch off the hair and beard clippers.
j Disconnect the cable from the hair and beard trimmer and remove the AC adaptor plug
from the socket.
j Remove the comb attachment 1 and clean it (see section called “Cutting without an
attachment” / “Remove the comb attachment 1 ”).
j Hold the hair and beard clippers with the front pointing upwards.
j Use moderate force to press the cutting edges downwards (see Figs. D).
j Clean the hair and beard clippers with the cleaning brush.
j Push the projection of the cutting attachment 8 under the edge of the casing (see Fig. E).
j Press the cutting edges of the cutting attachment 8 downwards until you can hear it click
into place.