Silvercrest SHBS 600 A1 - Manual (Page 57)

57 GB/MT
Cleaning and Care / Disposal
Note: The shaver head 2 may only be cleaned with medical alcohol. Do not use water or
any other liquids. Oil the shaver head 2 as described in the following section.
Q
Oiling the shaver head
2
j Only use acid-free oil, e.g. sewing machine oil.
j Remove the comb attachment 1 from the appliance as described in the section “Cutting
without an attachment”.
j Press the trimmer head 2 downwards (see Figs. D) and remove it.
j Put one or two drops of oil between the blades and distribute the oil evenly.
j Replace the shaver head 2 and the comb attachment 1 again (see Figs. E).
j Wipe off excess oil with a cloth.
Q
Disposal
Protect the environment!
This hair and beard clippers has two integrated NiMH rechargeable batteries
inside it.
Do not dispose of the batteries or the device with normal household refuse. Contact
your local council to find out about environmentally friendly and proper disposal of
the device (as electrical scrap). Observe the applicable local and national disposal
regulations with regard to separation of materials, waste collection and recycling
centres.
The packaging is wholly composed of environmentally friendly materials that can
be disposed of at a local recycling centre.
The following parts should be disposed of separately:
– Motor, metal parts, circuit board
– AC adaptor plug
– Plastic parts
– Rechargeable batteries
Take these parts for recycling.