Silvercrest SDT 1.7 A1 - Manual (Page 159)

SilverCrest SDT 1.7 A1
English - 157
Before you start
Remove the packaging from the device and the accessories. Remove all the packaging material
before getting started.
Connecting the Base
An illustration of the components mentioned below can be found in the Package Contents
section on page 147.

Using the supplied telephone cord [C], connect the telephone connection socket [25] on
the bottom of the base [B] to the telephone wall jack.

Connect the power adapter plug [D] to the power adapter socket [26] on the bottom of the
base [B]. Plug the power adapter [D] into an easily accessible wall outlet.
Please only use the supplied power adapter (manufacturer: 5ESP /model number:
5E-AD060050-E) for the base.

Secure the cables in the corresponding cable guides [27].
If possible, do not place the base in living rooms or bedrooms. Choose a place where you
are usually not present all the time (e.g. on the corridor). The low-power ECO mode will
already avoid unnecessary exposure to radiation.